自動焊錫機主要有點焊、拖焊、壓焊三種焊錫方式，具體使用的時候要根據產品的特性決定焊錫方式。接下來焊錫機廠家?guī)�你分析怎樣根�?jù)產品的特性決定焊錫方式。

  The auto ** tic soldering ** chine ** inly has three kinds of soldering methods, such as spot welding, drag welding and pressure welding. When using the soldering ** chine, the soldering process shall be decided according to the characteristics of the products. Next, solder ** chine ** nufacturer takes you to ** yse how to decide solder way according to the characteristic of the product.

  自動焊錫機的壓焊

  Welding of auto ** tic tin soldering ** chine

  壓焊主要是焊點要求拉力，且焊點分布較均勻，沒有插件的產品，可以使用壓焊，若用波峰焊或者回爐焊對于有拉力要求的產品最好是使用自動焊錫機焊錫，這樣對于有拉力要求的客戶是比較有保障的，壓焊有拉力要求，且焊點較均勻。

  Pressure welding is ** inly welding test requirements of tension, and joint distribution is uniform, no plug-in products can use pressure welding, soldering or welding if recycled for Tensile Requirements of the product is the best use of auto ** tic soldering ** chine for soldering, this tension requirements of customers is more secure, there is tension pressure welding uniform requirements, and solder joints.

  自動焊錫機的拖焊

  Tow welding of auto ** tic soldering ** chine

  拖焊主要是焊點分布均勻且焊點間距大于0.1mm ，此類產品需要固定插件，如果兩個焊點直接的間距少于0.1mm，不需要固定插件的，若使用拖焊會導致產品連錫的問題，這類產品使用波峰焊或者回爐焊速度最快，自動焊錫機拖焊的好處就是可以節省時間，提高效率。

  Drag the ** in welding solder joint is uniform distribution and spot spacing is greater than 0.1mm, such products need to be fixed plug, if two solder joints direct spacing is less than 0.1mm, without a fixed plug, if the use of drag soldering will lead to products even tin, this kind of product used in wave soldering or welding furnace to the fastest speed, auto ** tic soldering ** chine drag welding advantage can save time, improve efficiency.

  自動焊錫機的點焊

  Spot welding of auto ** tic soldering ** chine

  使用點焊的產品主要是焊點分布不均勻或者焊點要求的飽滿度高，還有另外一種情況產品的焊點分布均勻，但是插件需要固定，就需將其中的一個點固定好再用焊錫，這種情況使用點焊效率高。使用點焊的產品較多，因為很多產品的焊點分布都不均，而且對鍍錫都有不一樣的要求。

  The use of spot welding is the ** in product of the solder joint distribution is not uniform or solder joint requirements plumpness high, there is also a solder joint product distribution, but requires that needs to be fixed, one point fixed with solder, this kind of situation the use of high efficiency welding. The products used in spot welding are more, because ** ny products have uneven distribution of solder joints, and they have different requirements for tinning.

  深圳市創盈時代科技是榮獲國家高新技術企業稱號的自動焊錫機廠家，專注于雙Y雙頭焊錫機、雙頭三頭焊錫機、三軸四軸焊錫機、激光焊錫設備整體解決方案領導者，為你提供整體點膠解方案，歡迎來電咨詢。

  原文地址：本文關鍵字：自動焊錫機的焊錫方式介紹